How to Take Care of a Salt Water Pool?

As a pool owner, taking care of a saltwater pool has its own unique set of considerations. From knowing the right balance of chlorine and pH to understanding the proper maintenance schedule, there is a lot of information about keeping your saltwater pool in top shape.

However, with a few simple steps, it is possible to ensure that your saltwater pool is in perfect condition for the swimming season. In this article, I will provide tips on how to take care of your saltwater pool and troubleshoot potential problems.

Pro Tip: Regularly test and adjust the salt levels, clean the filter, and balance the pH levels to keep a saltwater pool in good condition.

How Do You Maintain A Saltwater Pool?

Regular saltwater pool maintenance is essential to ensure a safe and enjoyable swimming experience. To maintain a healthy pool, it is important to perform the following tasks weekly. Plus, I’ve shared some of my experienced tips for maintaining the saltwater pool.

Test and Adjust the Water Chemistry

Test the water chemistry regularly to ensure that the pH, alkalinity, and calcium hardness are within the safe range for swimming. Also, adjust the chlorine levels as needed to keep them within the correct range.

Clean the Pool

Clean the walls, floor, and steps of the pool with a brush or vacuum to remove dirt, debris, and algae. Also, skim the water’s surface to remove leaves and large debris.

Remember: You might need to alter things depending on the season, major storms, or the amount of pool use.

Flowing saltwater pool

A pump that delivers suction and pressure keeps the pool water moving. Outgoing water is collected by skimmers and the main drain and directed to the pump. It is then passed through a filter, which collects particles and cleans the water before returning to the pool.

Ph levels of water

Your swimming pool water has unique qualities that cause it to act differently. Many pool owners find it difficult to fully grasp the water quality in their pools.

The ph scale indicates how acidic your water is. This measurement serves as the basis for the chemistry of your water and keeps all other chemicals functioning properly so that your water is safe for swimming.

My experience

In various places, I prefer to use salt concentration detectors. Your jets might need to be adjusted if they are at noticeably different angles. Thankfully, most pools make it fairly simple to maintain proper pool circulation.

Checking whether all of the water in your pool can circulate through your filters is all that is necessary. If the water moves reasonably quickly, you should be good to go.

How Much Salt To Add To A Pool

The amount of salt you need to add to a pool depends on the size of the pool. Generally, you should add 250-400 pounds of salt to a 10,000-gallon pool. It is also important to check the pool’s salinity before adding salt to ensure the desired level is achieved.

Salt should be added to water until it has a salinity level of 0.4% to completely disinfect it. If the pool is empty of salt, it has to be salted with 35 pounds of salt for every 4000 liters of water to reach the optimal level (approx. 1000 gallons).

How Do You Maintain A Saltwater Pool?

Chlorinated pools versus saltwater pools

In a conventional pool, chlorine is directly injected into the water. Thanks to developments in the pool industry, a less complicated and safer option are now available.

A more efficient and natural sanitization technique is saltwater chlorination. Our system transforms dissolved salt into precisely the right amount of chlorine for crystal-clear, spotless, and luxuriously soft water.

Pool Salt Versus Table Salt

Pool salt is typically a finer-grained salt specifically designed for use in pools. It is more expensive than table salt and more effective at disinfecting a pool. Pool salt is typically made up of sodium chloride, a mineral compound that helps kill bacteria, algae, and other contaminants in the water.

It also helps improve the water’s clarity and stability and prevents scaling and staining. Table salt, on the other hand, does not have the same properties and can cause staining and other damage to the pool.

Notably, either pool salt or table salt doesn’t remove algae from your pool. For Algae, you have to use some alternative methods.

FAQS: How to Take Care of a Salt Water Pool?

The amount of salt a pool uses per month varies depending on the size of the pool, the type of salt chlorinator used, and the amount of use the pool gets. Generally, a pool should use between 25 and 50 pounds of salt per month.

To increase the free chlorine levels in your pool, shock it with more chlorine. Stunting your pool regularly also aids in removing more pollutants, algae, and germs. If your saltwater generator has a “BOOST” option, you can release more chlorine into the air.

The amount of salt needed for pool start-up varies depending on the pool size, salt system, and desired salt level, but typically it can take 2 to 4 bags of 40-50lb salt to raise the salt level of a 20,000-gallon pool to the recommended 3000-3500ppm.


As long as you follow a regimen and keep up with basic maintenance, saltwater pools are straightforward to maintain. For instance, ensure your pool is properly flowing, maintain balanced water chemistry, and don’t forget simple maintenance.

Saltwater pools might be a little intimidating, especially if you’re transitioning from a regular chlorination system to a salt pool. However, the long-term savings and convenience of upkeep make the first adjustment worthwhile. Moreover, step up your pool game with