As a pool owner, I know how important it is to protect my pool from dirt and debris. A pool cover is a great way to do this, but buying one can be expensive. That’s why I decided to build my pool cover from PVC pipe.
Building a pool cover from PVC pipe might seem daunting, but you can do it with the right supplies and instructions. Here’s how I built my own pool cover from PVC pipe.
Keep In Mind
- Make sure that you measure your pool accurately so that the cover will fit properly
- Use a high-quality adhesive to ensure a good seal between the pieces
- Use the right type of drill bit to drill the holes in the clips.
How To Build A Pool Cover From PVC Pipe?
Building a pool cover from PVC pipe is an easy and cost-effective way to protect your pool during the coldest months of the year. PVC pipe is a great choice for a pool cover because it is strong and lightweight and can be easily cut to fit the size of your pool. Let’s start building it.
Materials Required
- PVC pipe (1 ½ inch diameter, 1/2 inch thick) – length will depend on the size of your pool
- PVC Fittings (elbows, reducers, tees, etc.)
- PVC glue
- End caps
- Vinyl traps
- Drill
- Screws and Clips
- You will also need a saw to cut the PVC pipe to the desired length.
Step.1: Required Size Of Your Pool
The first step of building a pool cover from PVC pipe is to determine the size of your pool. Measure the length, width, and depth of your pool with a tape measure, and then use these measurements to determine the pipe size you’ll need. For my pool, I needed an 8-inch diameter PVC pipe, which I bought at my local hardware store.
Step.2: Glue All Of The Pieces Together
After acquiring the appropriate size of PVC pipe, you must proceed to glue all the pieces together. I started by gluing two pieces of pipe together to form a 90-degree angle. I repeated this process until I had two rectangles the same size as my pool.
Then, I glued the two rectangles together to form a box. Finally, I added four more pieces of pipe to make the box sturdier.
Step.3: Install End Caps
Install a PVC pipe end cap on one of the pipes’ ends. It’s a good idea to add an end cap towards the pipe size to secure the cover reel from attracting pests. To add a threaded cap, you’ll have to add a slid coupling on the other edge.
This is where the 90-degree PVC elbow parts come in handy. Create a hand hole for the cover reel by connecting an elbow, a small pipe, and an adapter to both ends of the long pipe. This will allow the cover to be rolled up easily.
Step.4: Connect The Pipe To Your Vinyl Trap
Once the end caps were installed, I connected the PVC pipe to my vinyl pool trap. This trap is designed to keep dirt and debris out of the pool, so I needed to connect it properly. I used a T-connector to connect the pipe to the trap and then secured it with a few screws.
Step.5: Drill Holes In The Clips
The next step was to drill holes in the clips. These clips would be used to attach the pool cover to the pool. I measured and marked where I wanted the holes to go and then used a drill to create them.
Step.6: Attach The Clips Properly
Once the holes were drilled, I proceeded to attach the clips to the PVC pipe. To ensure the cover would stay in place, I used a screwdriver to firmly secure the clips onto the pipe. It was crucial to make sure that the clips were securely attached.
Step.7: Test It Out
After filling my pool with water, I placed the cover on top and tested it out. To my satisfaction, the cover stayed in place and effectively prevented dirt and debris from entering, marking the successful completion of the final step.
Swimming Pool PVC Pipe
Swimming pool PVC pipe is a type of plastic pipe used to construct swimming pool plumbing systems. The pipe is available in a range of sizes and is used to connect the various components of the pool’s plumbing system, such as the pump, filter, and drains.
PVC pipe is known for its durability, making it a popular choice for swimming pool applications. For swimming pool plumbing, rigid PVC pipe is the best option. It would be far more long-lasting than an adjustable PVC pipe, which isn’t meant to be used in a basement.
Although rigid pipe makes it more difficult to make rotations in the piping and needs connectors instead of just flexing like flex PVC, it is even my winner for pool plumbing systems.
Remember: If your pool has heating systems, ensure the setup includes CPVC around them to secure the system’s impartiality.
PVC Pool Cover Support
Nowadays, pool owners are coming up with various solutions to address issues that manufacturers haven’t tackled, much like many DIY projects. The covers for the pool are brand new.
You can use arched type covers, like tepees shape, or, to put it another way, within the framework. They cover your pool and protect them from any snow or storm during the winter.
It easily slides over the top of the dome, made of pool cover support structure or aluminum, keeping it out of the pool.
- To make the main parts, screw around each other’s 1/2-inch PVC parts.
- Trimmed to fix the pool’s size.
- Cross parts that operate at the pool’s boundary should be evaluated and snipped.
- Torch lighters, lighten the PVC, and add it to the central component.
- Cut the overhanging edges of the pool’s perimeter walls.
- To add more help, trimmed lengths of PVC from the 90’s to the surface.
DIY Inflatable Pool Cover
With an innovative DIY pool cover and an inflatable swimming pool leaf collector, you can protect your pool from grime. This lightweight, long-lasting item is the most convenient way of keeping your pool free of leaves, insects, and other debris throughout the swimming season!
Long story short, simply connect the filter pump to a garden hose, drop it into the pool, and observe it work. Best of all, it can be easily stored and transported in its own attached nylon stocking.
DIY PVC Pool Frame
You can use the PVC pool frame to create a pool cover. Notably, a DIY PVC pool frame is not only a great option but also easy to put together with just some basic tools, screws, and fittings.
A PVC pool cover frame will keep your pool water heated and clear of leaves, small branches, and other debris. It’s simple to put together and take apart. Make your PVC frame fit the shape and dimensions of your pool.
FAQS: How To Build A Pool Cover From PVC Pipe?
How To Make a Pool Cover Out Of a Tarp?
Purchase a tarp that is large enough to cover your pool. Secure the tarp to the pool’s edges with bungee cords. Reinforce the tarp with straps and weights to keep it in place. Put blocks or sandbags on the corners to keep them from blowing away.
The Bottom Line
Building a pool cover from PVC pipe is a great way to protect your pool from debris, dirt, and other unwanted elements. For swimming pool covering sections, PVC Piping is a lightweight, cost-effective solution compared to purchasing a pre-built pool cover.
In this article, I have gone through the steps of how to make a pool cover from PVC pipe. You can use pipes and connectors from any home improvement store, and your design options are limited by the size of your pool and how much excitement you put into the task.
Moreover, Get your pool ready for summer with expert advice from ThePoolMania.com!
James Cooper