Where Is Reset Button On Dolphin Pool Cleaner

Have you ever found yourself in a situation where your Dolphin pool cleaner stops working, and you cannot figure out what’s wrong with it? It can be frustrating to deal with such situations, especially when you don’t know where to start troubleshooting.

One of the common issues that pool owners face is not being able to find the reset button on their Dolphin pool cleaners. So, where is the reset button on Dolphin pool cleaners?

Depending on the model, a Dolphin pool cleaner’s reset button could be at different places. The reset button is typically found on the power supply unit that ships with the cleaner.

Reset Button On Dolphin Pool Cleaner

The power supply unit has a ‘filter bag indicator’ and a ‘Reset button.’ A status indicator for the filter bag is included too. Two filter conditions can be seen by the red LED:

1 – Blinking

Blinking shows that there is a partial blockage of the filter.

2 – Fully Lit

When the filter light is on and indicates the need for cleaning and emptying, it means that the filter is obstructed.

You must press the reset button while operating the robot if the LED doesn’t turn off after the filter bag has been cleaned and emptied.

Press and hold the reset button until the light turns off between 5 and 20 seconds, then restart the vacuum. I advise taking your Dolphin to a nearby dealer or contacting Maytronics Customer Service if the light does not turn off.

Run the cleaner without filters to observe if the full filter indicator light turns on after resetting. The filters might need to be changed if this is the case. If you still cannot find the reset button on your Dolphin pool cleaner, it is recommended that you seek professional help.

How To Clean Dolphin Pool Cleaner Filters?

How To Clean Dolphin Pool Cleaner Filters?

Dolphin pool cleaners come with a unique dual-level filtration system that ensures your pool remains free of debris and dust while providing dependable filtration in all pool conditions.

No matter how often you run the pool cleaner but after every cleaning cycle, you must clean your pool cleaner’s filter bag or cartridges. Here are some steps to follow if you want to know how to clean dolphin pool cleaner filters:

  • Remove and clean the filter bag. Disconnect power, flip cleaner, remove cover, and take off filter bag from Dolphin pool cleaner.
  • Clean the filter bag with a hose and wash it in your washing machine on a gentle cycle periodically. Use a hose to clean the brushes regularly.
  • Place filter bag over frame, center shortest strap, and mount properly.
  • To clean the filter cartridge, avoid letting it dry out before cleaning.

Tip: If you notice debris inside the impeller, open it up and remove the debris.

Follow these simple steps to keep your dolphin pool cleaner’s filters clean and your pool crystal clear.

Frequently Asked Questions

Simply unplug it from the power source, wait 10 – 15 mins, and plug it back in. This way, you can restart your Maytronics Dolphin power supply.

Wrap Up:

When cleaning pools, the Dolphin Pool cleaner is a popular choice, but finding the reset button can be tricky. Don’t fret.

As discussed in the article, the dolphin pool cleaner has a full filter bag indicator, a Reset button, and a status indicator. Just press the reset button and hold it for about 3 to 5 seconds to reset the device. Pretty Simple, right?

For more such pool guides, don’t forget to visit thepoolmania.com! Your one-stop guide for all your pool-related queries.