How to remove dead algae from the pool without a vacuum

Wow, owning a pool at your place is just an amazing thing to have! But being a pool owner, you need to be vigilant about its sanitation. Otherwise, algae will make its way, and then you start looking for how to remove dead algae from the pool without a vacuum.

Suppose it’s just happened to you. There is no need to get anxious. This article will aid you in dislodging algae from its place and inhibit them from making a comeback.

You need to take any algaecide, apply it over the algae-infested surface, take a stiff brush and scrub hard until successful. Yes, you’ve done it.

How To Remove Dead Algae from The Pool Without A Vacuum?

Algae are living creatures that multiply when exposed to direct sunlight; they grow in water. Photosynthesis takes place in sunlight and algae growth. Resultantly, you get into trouble with how to remove dead algae from the pool without a vacuum.

Pool algae are caused by low levels of chlorine in the pool, frail water chemistry, or may be due to poor filtration. Algae spores can also easily travel to another pool using the same swimwear.

However, proper maintenance will keep your pool algae-free. But in case your pool gets affected by algae, we can help you by providing a solution regarding how to remove dead algae from the pool without a vacuum.

How To Remove Dead Algae from The Pool Without A Vacuum

These are some common types of algae and their treatments:

1. Green Algae

It can be green or blue, depending on the timespan of its existence there. The main reason for its growth is neglecting your pool maintenance. It sticks to walls, sometimes dislodges itself, and even floats on water.

Here, we have a good remedy for you, apply ‘borax’ to the affected place and scrub it hard with a stiff brush unless algae lose. Now, gather it with a net. The borax chiefly kills algae and prevents its further growth.

 2. Black Algae

If you find a blackish shade in your pool or it looks grotesque, it’ll be due to black spots against the pool walls, which signals that algae have made their way to your pool.

The good thing is you just need a stiff brush and baking soda, to deal with it. Baking soda has bicarbonate, which diminishes algae growth and breaks their roots to get rid of them.

All you have to do is, sprinkle baking soda on pool walls and scrub them hardly. Be vigilant in your cleaning, if you overlook any spot, it will regrow, and all your effort will be fruitless.

Once you’re sure you’ve dislodged the whole algae, you can gather it with a net and clear the clutter.

 3. Yellow Algae

Yellow or mustard algae can grow deep but less stubborn than the other two. It would help if you had a stiff brush and baking soda to remove it from the infested surface. You’re good to go with the same steps as black algae! Alert! Don’t let them fool you: they’ll bounce back with a vengeance unless you’ve slayed them perfectly.

How to remove algae from a pool without a vacuum?

Algae in the pool should be removed promptly. It doesn’t matter whether you have a vacuum because live algae keep multiplying and re-growing. It gives your pool a murky or bad greens look.

How To Remove Dead Algae From Pool Bottom

Mostly, people remove algae with these methods:

i. Shock treatment

Shocking means you’re hitting your pool with an extra potent dose. These pool shock treatments are designed to attack and strongly kill algae like oxidizers and chlorine.

Add a pound of pool shock product in a bucket carrying five litres of water at least and apply the shock product, allowing the filter to run overnight or for eight hours.

 ii. Add chlorine

One of the best treatments is ‘Chlorine tablets’, which will enhance your pool’s pH scale to 7-7.6 basic level, which is unfitting for algae and make your pool disinfectant.

Use one ounce of algaecide per 10,000 gallons of water weekly. It can be increased according to the size of the algae.

iii. Baking soda

Baking soda is really good for spot cleaning to kill algae and loosen it from the algae-infested surface of the wall. It works best for black algae. Just sprinkle some baking soda on the pool’s walls. Let it do some reaction. Now, scrub it hard with a brush.

iv. Borax

Borax kills and loosens the algae. Then, it would help if you scrubbed them. Dead particles float over the surface of the water. These algae particles should be filtered out from the pool. Otherwise, they will give a bad smell and murky look.

How to get rid of algae in the pool quickly?

Algae spread with rain, dirt or wind, etc. The problem is when they multiply, but you can learn from here how to clean algae from the pool by using any algaecide, brushing, balancing water pH, giving a shock, and then filtering out.

How To Get Dead Algae Off Bottom of Pool?

1.    Apply Algaecide

While figuring out how to get rid of algae in the pool, apply an algaecide because robotic pool cleaners are not result-oriented.

2.    Brush your Pool

Use a stiff brush on the walls. It’ll also help chlorine to go deeper into the surface and loosen algae. Pay proper heed to corners and crevices where algae are frequently grown at worst.  

3.    Balance water chemistry

Using a digital kit, you can check the pH of the water and its alkalinity. Harmonizing your water chemistry ensures your cleaner will be effective against the algae.

4.    Shock your Pool

Often, dead algae are stuck on the bottom of the pool. Add shock products like calcium hypochlorite shock or cal-hypo shock. The more serious your pool algae problem is, the more shock you will need.

5.    Filter out the Pool

When algae die in a pool, its colour turns out blue. Don’t get panic. It’s just because of dead algae. You have to filter it. Now, run the pool filter for at least eight hours until the water colour turns transparent.

FAQs: How to remove dead algae from the pool without a vacuum?

If you add shocks in your pools, it’ll chlorinate your pool water. This intense dose of chlorine causes the killing of algae growth.

When you use chlorine shock treatment, algae die in the water, which is the pool dust settles at the bottom. You can remove it with a robotic pool cleaner if you’re not using a vacuum.

Usually, if algae grow in an above-ground pool or Intex pool, it indicates water lacks chlorine. You can remove algae by applying chlorine-based pool shock treatment and allowing the pool pump to run overnight.

Final Thought

Algae is not dreadful or harmful. However, their existence can be quite creepy. That’s why every pool owner remains concerned about how to remove dead algae from the pool without a vacuum.

Using algaecides is the best option. They’re effective, can limit algae growth, and are easy to use. No extra tools are needed after applying the algaecides scrub strenuously. That’s all.

Thanks for reading this article. I do hope it worked for you perfectly.